Assistance with "Remote NZB Interface"

Technical support and discussion of Newsbin Version 6 series.

Assistance with "Remote NZB Interface"

Postby Ragonz » Sat Apr 09, 2016 7:34 pm

Having trouble setting this up, have spent about 2 hours on it trying everything but just cannot get it working, some assistance would be appreciated.

Newsbin Settings
https://www.dropbox.com/s/c08fzerpyj1nw ... 6.png?dl=0

What happens if I go to Http://localhost:7000 in Firefox
https://www.dropbox.com/s/jrhqgi7p1j30w ... 7.png?dl=0

SickRage says
"Unable to connect to host"
Tried 127.0.0.1:7000 as well as Http://localhost:7000

Turned off firewalls during testing, used different browser, ensured nothing else running on that port (also tested on other ports)
Ragonz
n00b
n00b
 
Posts: 2
Joined: Sat Apr 09, 2016 7:23 pm

Registered Newsbin User since: 06/08/14

Re: Assistance with "Remote NZB Interface"

Postby Quade » Sat Apr 09, 2016 8:29 pm

1 - Make up an API key, it can be any arbitrary thing and make sure you set it on both sides, in sick rage and Newsbin. You can use anything you want.

2 - Look in the logs in Newsbin and see if you see any errors.

The fact you can hit it with the web browser mean's it's listening and connectable.

You might want to install "Sonarr" and try it too. It has a test function which will tell you if it's working. I don't know if SickRage has one or not.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44988
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Assistance with "Remote NZB Interface"

Postby Ragonz » Sat Apr 09, 2016 9:43 pm

SickRage does have a test function, running it gives me the "Unable to connect to host"
Same error with an API key and/or a username and password

When I hit Newsbit with a browser I get the following error
"ERROR SickBeard Inergration: Error Reported"
Ragonz
n00b
n00b
 
Posts: 2
Joined: Sat Apr 09, 2016 7:23 pm

Registered Newsbin User since: 06/08/14

Re: Assistance with "Remote NZB Interface"

Postby Quade » Sat Apr 09, 2016 11:34 pm

Your picture #2 shows Newsbin responding on port 7000. I assume you have nothing else listening on 7000.

ERROR SickBeard Inergration: Error Reported


This is to be expected because you're not sending a command to Newsbin.

Try each of these:

http://127.0.0.1:7000/api?apikey=12345&mode=version

http://127.0.0.1:7000/api?apikey=12345&mode=history

Use whatever API key you set in Newsbin.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44988
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97


Return to V6 Technical Support

Who is online

Users browsing this forum: Google [Bot] and 2 guests

cron