Version 6.60 Beta 13 Available...

This is the place to help test and discuss Version 6 Beta releases.

Version 6.60 Beta 13 Available...

Postby dexter » Mon May 04, 2015 9:45 am

We are releasing B13 a little earlier than planned to get an important fix out. Apparently the compaction changes introduced in B11 and B12 is corrupting headers for some posting styles. You'll want to update to B13 if you download from headers. We will shoot for having sorting in the Download List working for B14. This version also has more complete support for Sonarr.

Summary:

  • Fixed Compaction issue. Was putting too much together in some cases.
  • Sonarr Support: Implemented pause, resume, delete and clear for history and queue. Also hooked up use of API key.
  • Now cleans up and validates paths before writing them whensetting options.
  • Cleaned up unrar paths having path variables like $(GROUP) on failure.
  • Now makes sure the unrar path set in Remote NNZB always has a trailing slash.
  • Now makes sure an unrar path is always set with NZB fileanme trailer when using Sonarr
  • Improvements to Download Groups list
  • Fixed issue when all chunks fail, the main progress bar wasn't going red

NOTE: The Download List is incompatible with anything prior to 6.60! We recommend you finish any queued downloads before installing this beta. This applies to the Wish List and Failed Files list too.

The download link is on the Newsbin Beta Page

You can either reply to this thread or send us a message through our Technical Support Form with any questions or issues.
User avatar
dexter
Site Admin
Site Admin
 
Posts: 9514
Joined: Fri May 18, 2001 3:50 pm
Location: Northern Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby Quade » Mon May 04, 2015 9:53 am

This doesn't have as much in it as I hoped but it looks like it finally solves and issue with compaction of header downloads.

It also has improved Sonarr support. If you play with Sonarr make sure the unrar path is unadorned. No $(NZBFILE) in it. Newsbin handles this automaticall.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby kstan12 » Mon May 04, 2015 3:56 pm

I will upgrade and poke at this/Sonarr tonight. Haven't been d'ling headers lately so I wasn't affected by that.
kstan12
Occasional Contributor
Occasional Contributor
 
Posts: 34
Joined: Wed Jul 06, 2011 7:32 pm

Registered Newsbin User since: 07/06/11

Re: Version 6.60 Beta 13 Available...

Postby Quade » Mon May 04, 2015 6:33 pm

It impacts NZB files too.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby JanJonkman » Tue May 05, 2015 8:40 am

Still having some performance issues

I'm auto downloading 500 + groups every 8 hours nb with over 5000 files after a while nb download speed slows down to an point nothing is retrieved anymore. Nb has a higher cpu utilization then when its downloading at the normal speed. Stopping and restarting nb is the only solution for me right now

Nb slows down to a point it show not a sign of respons anymore when switching tabs

having this issue now for some time and for sure in nb v11, 12 and 13

It looks like v10 doesn't have this problem

Regards

Jan
JanJonkman
Active Participant
Active Participant
 
Posts: 68
Joined: Tue Jan 17, 2012 12:35 pm

Registered Newsbin User since: 12/10/10

Re: Version 6.60 Beta 13 Available...

Postby Quade » Tue May 05, 2015 10:02 am

What's RAM usage look like when it starts to stall? I'm going to guess it's using a bunch of RAM.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby JanJonkman » Tue May 05, 2015 12:10 pm

Quade wrote:What's RAM usage look like when it starts to stall? I'm going to guess it's using a bunch of RAM.



Didn't check that, let you know tommorow
JanJonkman
Active Participant
Active Participant
 
Posts: 68
Joined: Tue Jan 17, 2012 12:35 pm

Registered Newsbin User since: 12/10/10

Re: Version 6.60 Beta 13 Available...

Postby Stuart264 » Tue May 05, 2015 6:33 pm

Ram usage is about 1.9 mb when it crashed just now on mine using 27% cpu.
User avatar
Stuart264
Seasoned User
Seasoned User
 
Posts: 227
Joined: Sun Jun 13, 2004 8:25 am
Location: United Kingdom

Registered Newsbin User since: 04/10/04

Re: Version 6.60 Beta 13 Available...

Postby Quade » Tue May 05, 2015 9:09 pm

1.9 Mb is probably impossible. 1.9 Gb is possible and is close to crashing level on 32 bit windows. On 64 bit windows it's just a decent amount of ram.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby saintsinner » Wed May 06, 2015 5:30 am

Quade:

I can also report that the header read issue is still present in B13 vs B9, it takes an extraordinarly long time to read the headers of multiple groups, while it's not as bad as ~B11 (when I last complained) it's still taking nearly 24x as long as in B9 for a similar header read (~10 seconds vs ~4 minutes).

Just verified by switching back to B9 and re-loading the same headers, 7 seconds vs several minutes in B13.
saintsinner
Active Participant
Active Participant
 
Posts: 65
Joined: Wed Jun 04, 2008 9:22 am
Location: High Desert Pacific North West

Registered Newsbin User since: 02/09/07

Re: Version 6.60 Beta 13 Available...

Postby JanJonkman » Wed May 06, 2015 10:47 am

JanJonkman wrote:
Quade wrote:What's RAM usage look like when it starts to stall? I'm going to guess it's using a bunch of RAM.



Didn't check that, let you know tommorow


Checked with V13/64

Well here are the results:

Fresh start

commit 359368 Kb
working set 321080 Kb
shareable 18724 Kb
private 307644 Kb


Slow down

Commit 1362292 Kb
working set 640008 Kb
Shareable 17520 Kb
Private 1182656 Kb

Regards,

Jan
JanJonkman
Active Participant
Active Participant
 
Posts: 68
Joined: Tue Jan 17, 2012 12:35 pm

Registered Newsbin User since: 12/10/10

Re: Version 6.60 Beta 13 Available...

Postby Quade » Wed May 06, 2015 2:43 pm

I can also report that the header read issue is still present in B13 vs B9, it takes an extraordinarly long time to read the headers of multiple groups, while it's not as bad as ~B11 (when I last complained) it's still taking nearly 24x as long as in B9 for a similar header read (~10 seconds vs ~4 minutes).

Just verified by switching back to B9 and re-loading the same headers, 7 seconds vs several minutes in B13.


Just for grins. Sort on date making the newest files the top most. Then restart Newsbin and load that group again. See how quick the load is. It occurs to me that if you load with it sorted on "Status", that the first sort will be very slow.

Edit: Turns out I'm already handling this case. I don't let status sort persist.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby saintsinner » Wed May 06, 2015 5:07 pm

Quade wrote:Just for grins. Sort on date making the newest files the top most. Then restart Newsbin and load that group again. See how quick the load is. It occurs to me that if you load with it sorted on "Status", that the first sort will be very slow.

Edit: Turns out I'm already handling this case. I don't let status sort persist.


Ahhhh, I don't sort on status, for the busy groups I sort based on size as generally the files I'm interested in will be in the top half this way and I'll see HD versions before LD versions. For the other groups, I'll do time, or name. I can reinstall B13 (I'm back on B9 since it works for my needs) and do a sort on time on the groups that trip my, oh lord this is slow, alarm if you'd like and time the difference but I'm gathering from your edit you don't need me to do that?
Last edited by saintsinner on Wed May 06, 2015 9:45 pm, edited 1 time in total.
saintsinner
Active Participant
Active Participant
 
Posts: 65
Joined: Wed Jun 04, 2008 9:22 am
Location: High Desert Pacific North West

Registered Newsbin User since: 02/09/07

Re: Version 6.60 Beta 13 Available...

Postby kstan12 » Wed May 06, 2015 9:10 pm

kstan12 wrote:I will upgrade and poke at this/Sonarr tonight. Haven't been d'ling headers lately so I wasn't affected by that.


Sonarr still doing the same thing with the strangely named files. You probably already know but FYI. Otherwise it seems pretty good. My activity log in Sonarr seems to be clearing out on its own. Seemed to get a bit jammed up in B12.
kstan12
Occasional Contributor
Occasional Contributor
 
Posts: 34
Joined: Wed Jul 06, 2011 7:32 pm

Registered Newsbin User since: 07/06/11

Re: Version 6.60 Beta 13 Available...

Postby JanJonkman » Thu May 07, 2015 11:19 am

JanJonkman wrote:
JanJonkman wrote:
Quade wrote:What's RAM usage look like when it starts to stall? I'm going to guess it's using a bunch of RAM.



Didn't check that, let you know tommorow


Checked also with V10/64

After 24 hours without slowing down the memory usage is:

V10

Fresh start 306548 Kb
Working set 293000 Kb
Shareable 20396 Kb
Private 273012 Kb

withoout slowing down

Commit 834740 Kb
working set 719424 Kb
Shareable 21300 Kb
Private 698068 Kb


Checked with V13/64

Well here are the results:

Fresh start

commit 359368 Kb
working set 321080 Kb
shareable 18724 Kb
private 307644 Kb


Slow down

Commit 1362292 Kb
working set 640008 Kb
Shareable 17520 Kb
Private 1182656 Kb

Regards,

Jan
JanJonkman
Active Participant
Active Participant
 
Posts: 68
Joined: Tue Jan 17, 2012 12:35 pm

Registered Newsbin User since: 12/10/10

Re: Version 6.60 Beta 13 Available...

Postby Quade » Thu May 07, 2015 11:55 am

Thanks. I'm looking at RAM usage.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby saintsinner » Thu May 07, 2015 7:10 pm

saintsinner wrote:Quade:

I can also report that the header read issue is still present in B13 vs B9, it takes an extraordinarly long time to read the headers of multiple groups, while it's not as bad as ~B11 (when I last complained) it's still taking nearly 24x as long as in B9 for a similar header read (~10 seconds vs ~4 minutes).

Just verified by switching back to B9 and re-loading the same headers, 7 seconds vs several minutes in B13.



And can now report that said slow read time is either ONLY true on older machines (above one was a quad core duo) or with people with a ton of headers on disk (not asking newsbin to read them mind you) as now that I've migrated to a new(er) computer and only have a days worth of headers on disk the groups load quick as heck with B13.... eventually I'll redownload all the headers and see if that impacts anything.
saintsinner
Active Participant
Active Participant
 
Posts: 65
Joined: Wed Jun 04, 2008 9:22 am
Location: High Desert Pacific North West

Registered Newsbin User since: 02/09/07

Re: Version 6.60 Beta 13 Available...

Postby Maelstroem » Fri May 08, 2015 10:40 am

Still having this weird issue where the last PAR file I post is sometimes shown as incomplete, pull headers again it shows complete but the properties show last part missing, black bar when downloading! I pulled headers via Forte Agent through my ISP and the post is complete and I can download the PAR without issue, so NB is not happy about something?

Edit: I've installed 6.56, deleted the group I post to and downloaded all headers and now see genuine complete posts where before I was seeing erroneous complete posts! Have posted as normal and pulled headers with 6.56 and no issues so far! I'll wait for the 6.60 production release and test again!
Maelstroem
Seasoned User
Seasoned User
 
Posts: 530
Joined: Sun Dec 21, 2003 11:20 am
Location: UK

Registered Newsbin User since: 05/03/03

Re: Version 6.60 Beta 13 Available...

Postby JSchuricht » Mon May 11, 2015 7:45 pm

There is definitely something gong on with RAM usage. With NB just sitting idle, RAM usage slowly creeps up towards the system max before windows starts shutting things down. Right now NB has been running for a bit over an hour and is calming 19GB and about 30% of the CPU. I can still click on most things in NB but nothing happens.
JSchuricht
Occasional Contributor
Occasional Contributor
 
Posts: 24
Joined: Thu Feb 15, 2007 3:43 pm

Registered Newsbin User since: 02/15/07

Re: Version 6.60 Beta 13 Available...

Postby Quade » Mon May 11, 2015 8:08 pm

That's pretty bad. Thanks for the report. I'll dig around for answers.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby Obecalp » Tue May 12, 2015 5:50 am

Last couple of beta downloads have been really slow, 100kB/s or so.
User avatar
Obecalp
Active Participant
Active Participant
 
Posts: 90
Joined: Sat Jan 03, 2004 8:19 pm
Location: Sweden

Registered Newsbin User since: 01/03/04

Re: Version 6.60 Beta 13 Available...

Postby JHawk » Tue May 12, 2015 2:45 pm

Just for info, I don't see a 'creeping' RAM issue...

Running B13, Windows 7 x64, 8GB RAM

Fresh start, NewsbinPro64.exe 33,888K
Added approx 14.5GB to download, NewsbinPro64.exe 194,484K, started downloading

Approx 1h 45m later, NewsbinPro64.exe 234,956K, still downloading (approx 8.6GB left), cache 132/200

Approx 3hr later, NewsbinPro64.exe 221,508K, still downloading (1GB left), cache 108/200

Completed downloading and has been idle for nearly 1hr, NewsbinPro64.exe 221,972K

Been idle for a further 1hr, NewsbinPro64.exe 221,928K

Closed and reopened, NewbinPro64.exe 33,660K

thanks
JHawk
Occasional Contributor
Occasional Contributor
 
Posts: 19
Joined: Mon Jul 19, 2004 5:28 pm

Registered Newsbin User since: 07/17/04

Re: Version 6.60 Beta 13 Available...

Postby Quade » Tue May 12, 2015 4:10 pm

Ram use seems pretty steady to me.

With it sitting there using 200 megs of ram, open the "help/about" menu and see how much RAM it's using after you close that window. This clears the cache.

The cache uses RAM and doesn't return it till Newsbin is closed down. you have a cache size of 200. Depending on how large the posts are, 150 megs for the cache isn't unreasonable.

Thanks for the report.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby kstan12 » Tue May 12, 2015 6:50 pm

I'm seeing the RAM issue. Never really paid attention to it until it was mentioned.

I leave Newsbin open for days on end because I use Sonarr. My cache is set to 1500. System was just using 12GB of RAM when I got home today. Did the Help/About, now I'm down to 8.3GB of RAM used. It is creeping for certain.
kstan12
Occasional Contributor
Occasional Contributor
 
Posts: 34
Joined: Wed Jul 06, 2011 7:32 pm

Registered Newsbin User since: 07/06/11

Re: Version 6.60 Beta 13 Available...

Postby kstan12 » Tue May 12, 2015 6:57 pm

A couple of other issues I've seen.

#1 - Downloads don't appear in the download list at times. Most do. Some just seem to disappear and I have to hunt for them through my file system.

#2 - Just had a 10GB download. It didn't autopar. It had enough enough PAR's to fix but it just sat there. I manually told it to assemble incompletes and then it started autopar/unrar. Then it didn't appear in the download list either.
kstan12
Occasional Contributor
Occasional Contributor
 
Posts: 34
Joined: Wed Jul 06, 2011 7:32 pm

Registered Newsbin User since: 07/06/11

Re: Version 6.60 Beta 13 Available...

Postby Quade » Tue May 12, 2015 7:29 pm

I leave Newsbin open for days on end because I use Sonarr. My cache is set to 1500. System was just using 12GB of RAM when I got home today. Did the Help/About, now I'm down to 8.3GB of RAM used. It is creeping for certain.


Your cache is worth at least 1.2 gigs of that ram use maybe more. There's nothing wrong with using a large cache but you're tell newsbin to use 800-1.2 megs of RAM per cache block. In fact from your results it looks like the cache was using 3.7 gigs. You might want to back the cache back down. Particularly if the download speed doesn't matter much like it probably doesn't using Sonarr.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby kstan12 » Tue May 12, 2015 9:17 pm

It's not much of an issue for me with 16GB of RAM. But I did see my 'memory - private working' set up to 2.4GB. Currently it is 1.46GB w/o a restart.

I can back down the cache but I have seen Newsbin use more memory from this morning to when I came home from work today and it was idle all day.
kstan12
Occasional Contributor
Occasional Contributor
 
Posts: 34
Joined: Wed Jul 06, 2011 7:32 pm

Registered Newsbin User since: 07/06/11

Re: Version 6.60 Beta 13 Available...

Postby JSchuricht » Wed May 13, 2015 9:26 am

Perhaps the cache has something to do with the RAM usage. I am set at 6000 with 30GB RAM available to the system. Even with help/about, NB just keeps taking more till windows kills it.
Last edited by JSchuricht on Wed May 13, 2015 9:35 am, edited 1 time in total.
JSchuricht
Occasional Contributor
Occasional Contributor
 
Posts: 24
Joined: Thu Feb 15, 2007 3:43 pm

Registered Newsbin User since: 02/15/07

Re: Version 6.60 Beta 13 Available...

Postby Quade » Wed May 13, 2015 9:31 am

If you don't mind the RAM usage then there's nothing really wrong with a cache that large. You can clear it the same way "help/about". I have an action item to automatically clear it when the download list empties but I haven't done it yet.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby gkar » Fri May 15, 2015 11:27 am

my internet watch topics have stopped updating...i have searches left, they are enabled,. Last updated says 12d 22h. Tried setting update interval from 1440 to 30 minutes. Left 3 hours now
User avatar
gkar
Seasoned User
Seasoned User
 
Posts: 306
Joined: Tue Jun 26, 2012 1:40 pm

Registered Newsbin User since: 06/27/12

Re: Version 6.60 Beta 13 Available...

Postby Quade » Fri May 15, 2015 11:39 am

What happens if you restart Newsbin? It always does an initial watch update when you restart.

How many search based watches do you have?
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby gkar » Fri May 15, 2015 12:29 pm

ok have started working again. I turned em all off and back on then restarted Nb. Thx 4 the info
User avatar
gkar
Seasoned User
Seasoned User
 
Posts: 306
Joined: Tue Jun 26, 2012 1:40 pm

Registered Newsbin User since: 06/27/12

Duplicate file detected

Postby Kent_Diego » Sun May 17, 2015 11:44 pm

I have been getting a lot of incomplete headers from Astraweb lately. I download anyway but often too incomplete to get file. I will then run the downloaded .nzb and delete the download. The .nzb is good but the new download moves to failed files list due to "Duplicate detected" error. If you re-add to download list Bypassing Filters then I get the file just fine.

I feel this is a bug and am requesting that Newsbin Pro not add a file to the downloaded file list until the entire file is successfully downloaded.

It would be awesome if Newsbin was smart enough to automatically find missing pieces of incomplete files using the .nzb file.

Thanks,
Kent
User avatar
Kent_Diego
Occasional Contributor
Occasional Contributor
 
Posts: 35
Joined: Sun Jul 02, 2006 1:22 pm

Registered Newsbin User since: 07/12/13

Auto PAR of Incomplete files

Postby Kent_Diego » Sun May 17, 2015 11:51 pm

I have been getting a lot of incomplete headers lately where Newsbin is not able to successfully get file. But if i select the PAR files and select "Resume Download" then I can coax Newsbin to successfully assemble incomplete and obtain file.

I am requesting the Newsbin be more aggressive in trying to recover incomplete files.

Thanks,
Kent
User avatar
Kent_Diego
Occasional Contributor
Occasional Contributor
 
Posts: 35
Joined: Sun Jul 02, 2006 1:22 pm

Registered Newsbin User since: 07/12/13

Re: Version 6.60 Beta 13 Available...

Postby Kent_Diego » Mon May 18, 2015 12:09 am

Since I started using Beta 13 I have been seeing something odd. I get many posts that are white (not green) and is says "Old Post". These are new files with new age stamps. I have "Hide Old" filter enabled and still see them but if I search they do not show and they get removed from view afterwards.
Seems odd and I think these are good files that should not be flagged Old. I never remember seeing anything like this before.

Thanks,
Kent
User avatar
Kent_Diego
Occasional Contributor
Occasional Contributor
 
Posts: 35
Joined: Sun Jul 02, 2006 1:22 pm

Registered Newsbin User since: 07/12/13

Re: Version 6.60 Beta 13 Available...

Postby wiggins09 » Tue May 19, 2015 8:10 am

Issues with 6.60b13 bld.4012
You may already know all this but I'm posting this just in case.
Clean install, W7 x64 - registry, old headers etc all cleaned before installing. Watch lists & filters all re-written.

NBP is generally faster. :)

RAM use - very similar to 6.5x for me - rounded down to nearest 000
    private working set - 370000k
    private bytes - 462000k
    working set - 392000k
(This is whilst working drawing my full bandwidth.)

'Download to Folder named for Subject' - previously a block select of various files (not multi-part packages) would put all selected in a single folder, now I get a mountain of individual folders & everything gets extracted. (I think you had said that you were prob. going to alter that back to the old handling method tho.)

Watch topics (for local headers) - some will not work any more. The search text no longer appears in the search field automatically, but sometimes it is applied & sometimes not. Manually entering the same string works.

Column widths - sometimes columns width & position doesn't 'stick' between tabs & restarts.

Find Field - in the download panel doesn't work.
Awesome FREE file manager - http://multicommander.com/
wiggins09
Seasoned User
Seasoned User
 
Posts: 142
Joined: Fri Feb 07, 2014 6:55 pm

Registered Newsbin User since: 02/08/14

Re: Version 6.60 Beta 13 Available...

Postby Quade » Tue May 19, 2015 10:45 am

Watch topics (for local headers) - some will not work any more. The search text no longer appears in the search field automatically, but sometimes it is applied & sometimes not. Manually entering the same string works.


Not sure what this means. The question is whether they fill in with matching posts. if you download headers and the proper matches get into the watch topic, then it's working.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby wiggins09 » Tue May 19, 2015 11:36 am

Quade wrote:
Watch topics (for local headers) - some will not work any more. The search text no longer appears in the search field automatically, but sometimes it is applied & sometimes not. Manually entering the same string works.


Not sure what this means. The question is whether they fill in with matching posts. if you download headers and the proper matches get into the watch topic, then it's working.


I meant some of my watch topics that previously worked (before the upgrade) no longer work.
The files are there listed in the header display but don't get picked up & displayed. I do not see why, as if I enter my search string manually they appear.

I since have found a possible reason - one says poster string is good but doesn't match when tested - this previously worked & I copied/pasted it from the properties dialog of a file. There must be some sort of character clash.

Other watches are working as they should. So I am a bit stumped... :?

EDIT
I just got it to return 57 of 334 results, i.e. watchlist gives 57, same search string in the group tab gives 334. Better than 0 but really confusing.
Awesome FREE file manager - http://multicommander.com/
wiggins09
Seasoned User
Seasoned User
 
Posts: 142
Joined: Fri Feb 07, 2014 6:55 pm

Registered Newsbin User since: 02/08/14

Re: Version 6.60 Beta 13 Available...

Postby Quade » Tue May 19, 2015 11:58 am

I since have found a possible reason - one says poster string is good but doesn't match when tested - this previously worked & I copied/pasted it from the properties dialog of a file. There must be some sort of character clash.


It's a regular expression so, you might need to escape some characters. You don't need all parts of the email address. Just enough to make a match

"robo.*cock"

for instance.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby wiggins09 » Wed May 20, 2015 7:45 am

Here's a few more niggles -
I found the clock for time to finish d/ls is erratic now. It used to be pretty accurate but now might be 3x overestimated or more. Wondered if it was a fixed ratio but watching different queues download & checking time taken seems to show a variable error in reporting.

On Watchlists I have seen a few more 'new' behaviors. Sometimes after entering a new search string, the pane does not refresh as it used to. Similarly when clearing a string from the search field, the pane may remain empty if no results had been found.

On the D/L pane 'find' it no longer saves the previously entered strings after restart. Not that it works right now :P

Searching for a poster doesn't always work on headers, sometimes it will after a restart but then might fail after several different entries/searches. I've tried this when I can see the poster & just want to test the search function in the headers pane.

Could anything create an intermittent fault for DB access? As some of these issues could be explained by that.
Awesome FREE file manager - http://multicommander.com/
wiggins09
Seasoned User
Seasoned User
 
Posts: 142
Joined: Fri Feb 07, 2014 6:55 pm

Registered Newsbin User since: 02/08/14

Re: Version 6.60 Beta 13 Available...

Postby Quade » Wed May 20, 2015 8:19 am

Much of this has been addressed in B14. For example if you hit enter while using find in a watch it'll clear the existing records in that window because it thinks you're doing a new search.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby wiggins09 » Wed May 20, 2015 9:27 am

Thanks Quade.
I hadn't been using <enter> but I did try clicking the search button.
I will wait for B14.
I think my current priority wish is for 'Download to Folder named for Subject' to revert to 6.5x behavior! :)
Awesome FREE file manager - http://multicommander.com/
wiggins09
Seasoned User
Seasoned User
 
Posts: 142
Joined: Fri Feb 07, 2014 6:55 pm

Registered Newsbin User since: 02/08/14

Re: Version 6.60 Beta 13 Available...

Postby Quade » Wed May 20, 2015 10:20 am

I hadn't been using <enter> but I did try clicking the search button.


Watch lists don't need "enter". They search each time you enter a character.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby wiggins09 » Thu May 21, 2015 7:59 am

Yeah I'd assumed that was the case. Just isn't happening all the time. My watchlists are a bit temperamental right now.
***
Noticed something else to bug you about today ;)
On start NBP is using 11-12% CPU (empty queue)
When leeching this rises to 13-14%
D/L'ing headers this goes to 23-24%

Reason I noticed was my fans got louder when the queue was empty - I found NBP was still using 12-13%. It stayed this way for as long as I left it & wouldn't close using the exit dialog, I used TM to force close.
This occurs both without & with headers loaded.
I restarted & had the same issues inc. after a reboot.
With further tests I found if I wait for 30+ seconds it can close without being forced. A long wait compared to 6.5x


I noticed that default had the same result/ticks as HiPower in settings/performance - wondered if that was correct.

Dunno if this will be of use - I did a copy of handles etc from Process Explorer - this is whilst NBP is running without any active tasks, I would normally expect almost no CPU use at this point. It is at 13%.

Code: Select all
Process: NewsbinPro64.exe Pid: 2804

Type   Name
ALPC Port   \RPC Control\OLE0DEB7D4166944E2FAFEEE60A5533
Desktop   \Default
Directory   \KnownDlls
Directory   \Sessions\1\BaseNamedObjects
Event   \Sessions\1\BaseNamedObjects\I:__Back-up_Newsbin-6b13.nbi
Event   \KernelObjects\MaximumCommitCondition
File   C:\Program Files\Newsbin
File   C:\Windows\winsxs\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18807_none_fa381d5f175bfb52
File   C:\Windows\winsxs\amd64_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.7601.18834_none_2b26557a71eb7442
File   \FileSystem\Filters\FltMgrMsg
File   \Device\KsecDD
File   C:\Users\Wiggins\AppData\Local\Newsbin\GuiItems.db3
File   C:\Users\Wiggins\AppData\Local\Newsbin\GuiItems.db3
File   C:\Users\Wiggins\AppData\Local\Newsbin\GuiItems.db3
File   C:\Users\Wiggins\AppData\Local\Newsbin\GuiItems.db3
File   C:\Windows\Fonts\StaticCache.dat
File   C:\Users\Wiggins\AppData\Local\Newsbin\DownloadMarker.DB3
File   C:\Users\Wiggins\AppData\Local\Newsbin\Logfile.txt
File   C:\Users\Wiggins\AppData\Local\Newsbin\DownloadMarker.DB3
File   C:\Windows\System32\en-US\KernelBase.dll.mui
File   C:\Windows\winsxs\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18807_none_fa381d5f175bfb52
File   C:\Users\Wiggins\AppData\Local\Newsbin\DownloadMarker.DB3
File   \Device\Nsi
File   C:\Windows\winsxs\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18807_none_fa381d5f175bfb52
File   \Device\Afd
File   C:\Users\Wiggins\AppData\Local\Newsbin\SIGNATURE.db3
File   C:\Users\Wiggins\AppData\Local\Newsbin\DownloadsV2.db3
File   C:\Users\Wiggins\AppData\Local\Newsbin\SIGNATURE.db3
File   C:\Users\Wiggins\AppData\Local\Newsbin\DeletedPosters.db3
File   C:\Users\Wiggins\AppData\Local\Newsbin\Downloaded.db3
File   C:\Users\Wiggins\AppData\Local\Newsbin\DownloadedFiles.txt
File   \Device\Mailslot\NewsbinPipe
File   C:\Users\Wiggins\AppData\Local\Newsbin\DownloadMarker.DB3
File   C:\Users\Wiggins\AppData\Local\Newsbin\spool_v6\alt.binaries.sux\StorageData.db3-journal
File   C:\Users\Wiggins\AppData\Local\Newsbin\DownloadMarker.DB3
File   C:\Users\Wiggins\AppData\Local\Newsbin\DownloadMarker.DB3
File   C:\Users\Wiggins\AppData\Local\Newsbin\spool_v6\alt.binaries.sux\Storage.db3
File   C:\Users\Wiggins\AppData\Local\Newsbin\spool_v6\alt.binaries.sux\Storage.db3-journal
File   C:\Users\Wiggins\AppData\Local\Newsbin\spool_v6\alt.binaries.sux\StorageData.db3
File   C:\Users\Wiggins\AppData\Local\Newsbin\spool_v6\alt.binaries.sux\StorageData.db3
File   C:\Users\Wiggins\AppData\Local\Newsbin\DownloadMarker.DB3
File   C:\Users\Wiggins\AppData\Local\Newsbin\DownloadMarker.DB3
Key   HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options
Key   HKLM\SYSTEM\ControlSet001\Control\Nls\Sorting\Versions
Key   HKLM\SYSTEM\ControlSet001\Control\SESSION MANAGER
Key   HKLM
Key   HKCU\Software\Classes
Key   HKCU\Software\Classes\CLSID
Key   HKLM\SYSTEM\ControlSet001\services\WinSock2\Parameters\Protocol_Catalog9
Key   HKLM\SYSTEM\ControlSet001\services\WinSock2\Parameters\NameSpace_Catalog5
Key   HKCU
Key   HKCU\Software\DJI Interprises\Newsbin50
Key   HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer
Key   HKLM\SYSTEM\ControlSet001\Control\Nls\Language Groups
Key   HKLM\SYSTEM\ControlSet001\Control\Nls\Locale
Key   HKLM\SYSTEM\ControlSet001\Control\Nls\Locale\Alternate Sorts
Key   HKCU\Software\Classes
Key   HKLM\SOFTWARE\Policies\Microsoft\Windows\CurrentVersion\Internet Settings
Key   HKCU\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings
Key   HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
Key   HKLM\SOFTWARE\Microsoft\Internet Explorer\MAIN\FeatureControl
Key   HKCU\Software\Microsoft\Internet Explorer\Main\FeatureControl
Key   HKCU\Software\Microsoft\Internet Explorer\Main
Key   HKLM\SOFTWARE\Microsoft\Internet Explorer\MAIN
Key   HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts
Key   HKCR\PROTOCOLS\Filter\text/xml
Key   HKLM\SOFTWARE\Policies
Key   HKCU\Software\Policies
Key   HKCU\Software
Key   HKLM\SOFTWARE
Key   HKLM\SOFTWARE\Wow6432Node
Key   HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings\ZoneMap
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\ZoneMap
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{B4BFCC3A-DB2C-424C-B029-7FE99A87C641}\PropertyBag
Key   HKCU\Software\Microsoft\Clock
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{FDD39AD0-238F-46AF-ADB4-6C85480369C7}\PropertyBag
Key   HKCU
Key   HKCU\Software\DJI Interprises\Newsbin50
Key   HKCU\Software\DJI Interprises\Newsbin50
Key   HKCU\Software\DJI Interprises\Newsbin50
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{56784854-C6CB-462B-8169-88E350ACB882}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{2112AB0A-C86A-4FFE-A368-0DE96E47012E}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{F38BF404-1D43-42F2-9305-67DE0B28FC23}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{491E922F-5643-4AF4-A7EB-4E7A138D8174}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{52528A6B-B9E3-4ADD-B60D-588C2DBA842D}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{18989B1D-99B5-455B-841C-AB7C74E4DDFC}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{2400183A-6185-49FB-A2D8-4A392A602BA3}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{33E28130-4E1E-4676-835A-98395C3BC3BB}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{B6EBFB86-6907-413C-9AF7-4FC2ABF07CC5}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{905E63B6-C1BF-494E-B29C-65B732D3D21A}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{A302545D-DEFF-464B-ABE8-61C8648D939B}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{3214FAB5-9757-4298-BB61-92A9DEAA44FF}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{7B0DB17D-9CD2-4A93-9733-46CC89022E7C}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{4BD8D571-6D19-48D3-BE97-422220080E43}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{1AC14E77-02E7-4E5D-B744-2EB1AE5198B7}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{F3CE0F7C-4901-4ACC-8648-D5D44B04EF8F}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{ED4824AF-DCE4-45A8-81E2-FC7965083634}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{7C5A40EF-A0FB-4BFC-874A-C0F2E0B9FA8E}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{D65231B0-B2F1-4857-A4CE-A8E7C6EA7D27}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{A990AE9F-A03B-4E80-94BC-9912D7504104}\PropertyBag
Key   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{FD228CB7-AE11-4AE3-864C-16F3910AB8FE}\PropertyBag
Mutant   \Sessions\1\BaseNamedObjects\ZonesCacheCounterMutex
Mutant   \Sessions\1\BaseNamedObjects\ZonesLockedCacheCounterMutex
Mutant   \Sessions\1\BaseNamedObjects\DBWinMutex
Section   \Sessions\1\BaseNamedObjects\mchLLEW2$af4
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773adcc0
Section   \Sessions\1\BaseNamedObjects\AutoUnhookMap$00000af4$fce20000
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000fd490000
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $0000000077383210
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000fcdf2370
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000fcdf2598
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000fd434c30
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $000000007715dbc0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000ff067490
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000fe3e89c8
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000fe3e8388
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000fe3e9334
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000fbf61350
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000fbf61180
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000fe3e22cc
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000771cf710
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000771cf510
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000771d54e0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000771cf540
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $0000000077151870
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000fd8323e0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000fd619190
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000fe3e24c0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000fe3e5bf0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000fe3ec8d0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000fe3eb9e8
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000772d45a4
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $0000000077283894
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $0000000077288c20
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $000000007726f874
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $0000000077274d4c
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $0000000077269bcc
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000772733b0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $000000007726a404
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000772776e4
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $000000007726d2b0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $0000000077270b74
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $000000007726d338
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $0000000077276b50
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $0000000077288be0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $000000007726fac0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000772ddf18
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $0000000077275438
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000772828e4
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $000000007726dc40
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000772dcc08
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $000000007727dd90
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $0000000077288cd0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $0000000077288a10
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $0000000077275010
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $000000007726c720
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $0000000077266ef0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $0000000077268530
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $000000007726aad0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $000000007727f780
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $000000007728ad60
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $000000007727e874
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $000000007726cd50
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $0000000077268184
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $000000007726f510
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $000000007726aaa0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000772b14e0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ae420
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ae320
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ae5a0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ae050
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ae530
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ae630
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ae5d0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ae0b0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ae100
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773af340
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773af3c0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ade90
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ae4f0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ae9c0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773af2c0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ae070
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773adf40
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ae120
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773adf00
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773adfe0
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ae640
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773aea50
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773add90
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ae650
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000773ae310
Section   \Sessions\1\BaseNamedObjects\windows_shell_global_counters
Section   \BaseNamedObjects\__ComCatalogCache__
Section   \BaseNamedObjects\__ComCatalogCache__
Section   \Sessions\1\BaseNamedObjects\UrlZonesSM_Wiggins
Section   \Sessions\1\BaseNamedObjects\NamedBuffer, mAH, Process $00000af4, API $00000000038450a0
Section   \BaseNamedObjects\C:*ProgramData*Microsoft*Windows*Caches*{6AF0698E-D558-4F6E-9B3C-3716689AF493}.2.ver0x0000000000000049.db
Section   \BaseNamedObjects\windows_shell_global_counters
Section   \BaseNamedObjects\C:*ProgramData*Microsoft*Windows*Caches*cversions.2.ro
Section   \BaseNamedObjects\C:*ProgramData*Microsoft*Windows*Caches*cversions.2.ro
Section   \BaseNamedObjects\C:*ProgramData*Microsoft*Windows*Caches*{DDF571F2-BE98-426D-8288-1A9A39C3FDA2}.2.ver0x0000000000000002.db
Section   \BaseNamedObjects\C:*ProgramData*Microsoft*Windows*Caches*cversions.2.ro
Thread   NewsbinPro64.exe(2804): 4172
Thread   NewsbinPro64.exe(2804): 4172
Thread   NewsbinPro64.exe(2804): 2576
Thread   NewsbinPro64.exe(2804): 2576
Thread   NewsbinPro64.exe(2804): 4056
Thread   NewsbinPro64.exe(2804): 6832
Thread   NewsbinPro64.exe(2804): 4172
Thread   NewsbinPro64.exe(2804): 4172
Thread   NewsbinPro64.exe(2804): 4312
Thread   NewsbinPro64.exe(2804): 2684
Thread   NewsbinPro64.exe(2804): 6712
Thread   NewsbinPro64.exe(2804): 2684
Thread   NewsbinPro64.exe(2804): 2684
Thread   NewsbinPro64.exe(2804): 6292
Thread   NewsbinPro64.exe(2804): 6832
Thread   NewsbinPro64.exe(2804): 6512
Thread   NewsbinPro64.exe(2804): 6780
Thread   NewsbinPro64.exe(2804): 2760
Thread   NewsbinPro64.exe(2804): 4312
Thread   NewsbinPro64.exe(2804): 1584
Thread   NewsbinPro64.exe(2804): 1240
Thread   NewsbinPro64.exe(2804): 3032
Thread   NewsbinPro64.exe(2804): 6604
Thread   NewsbinPro64.exe(2804): 2332
Thread   NewsbinPro64.exe(2804): 5412
Thread   NewsbinPro64.exe(2804): 6972
Thread   NewsbinPro64.exe(2804): 6200
Thread   NewsbinPro64.exe(2804): 6816
Thread   NewsbinPro64.exe(2804): 2612
Thread   NewsbinPro64.exe(2804): 7164
Thread   NewsbinPro64.exe(2804): 3480
Thread   NewsbinPro64.exe(2804): 6080
Thread   NewsbinPro64.exe(2804): 6472
Thread   NewsbinPro64.exe(2804): 956
Thread   NewsbinPro64.exe(2804): 6624
Thread   NewsbinPro64.exe(2804): 5816
Thread   NewsbinPro64.exe(2804): 5456
Thread   NewsbinPro64.exe(2804): 4728
Thread   NewsbinPro64.exe(2804): 6564
Thread   NewsbinPro64.exe(2804): 1600
Thread   NewsbinPro64.exe(2804): 3716
Thread   NewsbinPro64.exe(2804): 7004
Thread   NewsbinPro64.exe(2804): 6864
Thread   NewsbinPro64.exe(2804): 5848
Thread   NewsbinPro64.exe(2804): 4844
Thread   NewsbinPro64.exe(2804): 6416
Thread   NewsbinPro64.exe(2804): 3732
Thread   NewsbinPro64.exe(2804): 5812
Thread   NewsbinPro64.exe(2804): 1084
Thread   NewsbinPro64.exe(2804): 6784
Thread   NewsbinPro64.exe(2804): 5032
Thread   NewsbinPro64.exe(2804): 1196
Thread   NewsbinPro64.exe(2804): 7080
Thread   NewsbinPro64.exe(2804): 2088
Thread   NewsbinPro64.exe(2804): 7092
Thread   NewsbinPro64.exe(2804): 7040
Thread   NewsbinPro64.exe(2804): 6796
Thread   NewsbinPro64.exe(2804): 3576
Thread   NewsbinPro64.exe(2804): 5368
Thread   NewsbinPro64.exe(2804): 2640
Thread   NewsbinPro64.exe(2804): 1952
Thread   NewsbinPro64.exe(2804): 5188
Thread   NewsbinPro64.exe(2804): 6256
Thread   NewsbinPro64.exe(2804): 1252
Thread   NewsbinPro64.exe(2804): 1444
Thread   NewsbinPro64.exe(2804): 6188
Thread   NewsbinPro64.exe(2804): 5916
Thread   NewsbinPro64.exe(2804): 1584
Thread   NewsbinPro64.exe(2804): 1584
Thread   NewsbinPro64.exe(2804): 1240
Thread   NewsbinPro64.exe(2804): 1240
Thread   NewsbinPro64.exe(2804): 3032
Thread   NewsbinPro64.exe(2804): 3032
Thread   NewsbinPro64.exe(2804): 6604
Thread   NewsbinPro64.exe(2804): 6604
Thread   NewsbinPro64.exe(2804): 2332
Thread   NewsbinPro64.exe(2804): 2332
Thread   NewsbinPro64.exe(2804): 5412
Thread   NewsbinPro64.exe(2804): 5412
Thread   NewsbinPro64.exe(2804): 6972
Thread   NewsbinPro64.exe(2804): 6972
Thread   NewsbinPro64.exe(2804): 6200
Thread   NewsbinPro64.exe(2804): 6200
Thread   NewsbinPro64.exe(2804): 6816
Thread   NewsbinPro64.exe(2804): 6816
Thread   NewsbinPro64.exe(2804): 2612
Thread   NewsbinPro64.exe(2804): 2612
Thread   NewsbinPro64.exe(2804): 7164
Thread   NewsbinPro64.exe(2804): 7164
Thread   NewsbinPro64.exe(2804): 3480
Thread   NewsbinPro64.exe(2804): 3480
Thread   NewsbinPro64.exe(2804): 6080
Thread   NewsbinPro64.exe(2804): 6080
Thread   NewsbinPro64.exe(2804): 1196
Thread   NewsbinPro64.exe(2804): 7100
Thread   NewsbinPro64.exe(2804): 6832
Thread   NewsbinPro64.exe(2804): 6512
Thread   NewsbinPro64.exe(2804): 6472
Thread   NewsbinPro64.exe(2804): 6472
Thread   NewsbinPro64.exe(2804): 956
Thread   NewsbinPro64.exe(2804): 956
Thread   NewsbinPro64.exe(2804): 6624
Thread   NewsbinPro64.exe(2804): 6624
Thread   NewsbinPro64.exe(2804): 5816
Thread   NewsbinPro64.exe(2804): 5816
Thread   NewsbinPro64.exe(2804): 5456
Thread   NewsbinPro64.exe(2804): 5456
Thread   NewsbinPro64.exe(2804): 4728
Thread   NewsbinPro64.exe(2804): 4728
Thread   NewsbinPro64.exe(2804): 4844
Thread   NewsbinPro64.exe(2804): 4844
Thread   NewsbinPro64.exe(2804): 6416
Thread   NewsbinPro64.exe(2804): 6416
Thread   NewsbinPro64.exe(2804): 3732
Thread   NewsbinPro64.exe(2804): 3732
Thread   NewsbinPro64.exe(2804): 5812
Thread   NewsbinPro64.exe(2804): 5812
Thread   NewsbinPro64.exe(2804): 1084
Thread   NewsbinPro64.exe(2804): 1084
Thread   NewsbinPro64.exe(2804): 6784
Thread   NewsbinPro64.exe(2804): 6784
Thread   NewsbinPro64.exe(2804): 4816
Thread   NewsbinPro64.exe(2804): 1952
Thread   NewsbinPro64.exe(2804): 1952
Thread   NewsbinPro64.exe(2804): 1196
Thread   NewsbinPro64.exe(2804): 1600
Thread   NewsbinPro64.exe(2804): 1600
Thread   NewsbinPro64.exe(2804): 6512
Thread   NewsbinPro64.exe(2804): 3312
Thread   NewsbinPro64.exe(2804): 5848
Thread   NewsbinPro64.exe(2804): 2088
Thread   NewsbinPro64.exe(2804): 5848
Thread   NewsbinPro64.exe(2804): 2088
Thread   NewsbinPro64.exe(2804): 6796
Thread   NewsbinPro64.exe(2804): 2760
Thread   NewsbinPro64.exe(2804): 6796
Thread   NewsbinPro64.exe(2804): 6776
Thread   NewsbinPro64.exe(2804): 3576
Thread   NewsbinPro64.exe(2804): 3576
Thread   NewsbinPro64.exe(2804): 5032
Thread   NewsbinPro64.exe(2804): 5032
Thread   NewsbinPro64.exe(2804): 7004
Thread   NewsbinPro64.exe(2804): 7004
Thread   NewsbinPro64.exe(2804): 5188
Thread   NewsbinPro64.exe(2804): 5188
Thread   NewsbinPro64.exe(2804): 7040
Thread   NewsbinPro64.exe(2804): 7040
Thread   NewsbinPro64.exe(2804): 6564
Thread   NewsbinPro64.exe(2804): 6564
Thread   NewsbinPro64.exe(2804): 5368
Thread   NewsbinPro64.exe(2804): 3716
Thread   NewsbinPro64.exe(2804): 5368
Thread   NewsbinPro64.exe(2804): 2864
Thread   NewsbinPro64.exe(2804): 7080
Thread   NewsbinPro64.exe(2804): 7080
Thread   NewsbinPro64.exe(2804): 3716
Thread   NewsbinPro64.exe(2804): 7092
Thread   NewsbinPro64.exe(2804): 7092
Thread   NewsbinPro64.exe(2804): 6864
Thread   NewsbinPro64.exe(2804): 6864
Thread   NewsbinPro64.exe(2804): 2640
Thread   NewsbinPro64.exe(2804): 2640
Thread   NewsbinPro64.exe(2804): 1868
Thread   NewsbinPro64.exe(2804): 6788
WindowStation   \Sessions\1\Windows\WindowStations\WinSta0
WindowStation   \Sessions\1\Windows\WindowStations\WinSta0
Awesome FREE file manager - http://multicommander.com/
wiggins09
Seasoned User
Seasoned User
 
Posts: 142
Joined: Fri Feb 07, 2014 6:55 pm

Registered Newsbin User since: 02/08/14

Re: Version 6.60 Beta 13 Available...

Postby Quade » Thu May 21, 2015 8:28 am

Sounds like it's importing headers. Do you see a number in parens down on the status bar near the "Cache" line?

Looks like you run a crapload of connections too.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby wiggins09 » Thu May 21, 2015 10:47 am

Quade wrote:Sounds like it's importing headers. Do you see a number in parens down on the status bar near the "Cache" line?

Looks like you run a crapload of connections too.


Currently the number in brackets is 0 (under chunk cache use state) - so was that active local processing of headers because I have just leeched 10 days of headers to a fresh install...?

I have 2 different servers but am not using max connections, 33 of 50 possible. I didn't think that was huge considering.
Awesome FREE file manager - http://multicommander.com/
wiggins09
Seasoned User
Seasoned User
 
Posts: 142
Joined: Fri Feb 07, 2014 6:55 pm

Registered Newsbin User since: 02/08/14

Re: Version 6.60 Beta 13 Available...

Postby Quade » Thu May 21, 2015 11:21 am

I have 2 different servers but am not using max connections, 33 of 50 possible. I didn't think that was huge considering.


Perhaps "pointless" is the point I'm making. It's kinda pointless to run that many connections. I get 120 Mbps with 20 connections and I don't even need that many to do it. You want to run as few connections as gives you max speed for your line, any more than that just churns, uses ram and might even slow the download.

You have weird issues. What with all your databases getting corrupted at once (or so it seems). I'm wondering how many of your issues are related to what looks like problems writing to your disks.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Re: Version 6.60 Beta 13 Available...

Postby wiggins09 » Fri May 22, 2015 3:05 am

That does raise the question of why server farms offer lots of connections. (Giganews @ 50 on their premium service) But I take your point as you know more about the guts of this system than I do.
Historically using more connections helped my line speed. The nearest tel. exchange is not that great, which I believed might be a problem.

I have started to wonder about disk access as well.
The NBP DB is on an SSD, - tests say all good on that hardware (assuming the tests are good of course) & it has <50% free space.
So I am now wondering about the AV etc, which was upgraded about a week or so ago. That is the only 'system-wide' change since these issues began. I know it is more controlling/invasive than the old version, so maybe I haven't added enough to the 'exclusions' settings.
Awesome FREE file manager - http://multicommander.com/
wiggins09
Seasoned User
Seasoned User
 
Posts: 142
Joined: Fri Feb 07, 2014 6:55 pm

Registered Newsbin User since: 02/08/14

Re: Version 6.60 Beta 13 Available...

Postby wiggins09 » Fri May 22, 2015 8:59 am

UPDATE
I added the whole data folder
C:\Users\...\AppData\Local\Newsbin
to exclusions.
My avg CPU use is very different now.
Previous session <16%
Current session <3%

I assume that the AV system was sand-boxing activity in that dir despite NBP being fully whitelisted.

Thanks for taking a look at this Quade, you gave me some ideas ;)
Awesome FREE file manager - http://multicommander.com/
wiggins09
Seasoned User
Seasoned User
 
Posts: 142
Joined: Fri Feb 07, 2014 6:55 pm

Registered Newsbin User since: 02/08/14

Re: Version 6.60 Beta 13 Available...

Postby Quade » Fri May 22, 2015 9:18 am

That does raise the question of why server farms offer lots of connections. (Giganews @ 50 on their premium service) But I take your point as you know more about the guts of this system than I do.
Historically using more connections helped my line speed. The nearest tel. exchange is not that great, which I believed might be a problem.


Marketing. People don't understand connections but assume "more is better".

So I am now wondering about the AV etc, which was upgraded about a week or so ago. That is the only 'system-wide' change since these issues began. I know it is more controlling/invasive than the old version, so maybe I haven't added enough to the 'exclusions' settings.


AV is the source of most strange issues. For it to work, it has to tie itself deeply into the guts of Windows.
User avatar
Quade
Eternal n00b
Eternal n00b
 
Posts: 44986
Joined: Sat May 19, 2001 12:41 am
Location: Virginia, US

Registered Newsbin User since: 10/24/97

Next

Return to Newsbin Version 6 Beta Support

Who is online

Users browsing this forum: Bing [Bot] and 2 guests