newsbin.com

by **dexter** » Wed Feb 02, 2011 2:57 pm

I've created a wiki page to start tracking bugs. You can post confirmed bugs here, PM them to me, or submit them through our Technical Support Form.

A confirmed bug means that at least one other person has recreated the problem.

UPDATE: If you are experiencing an issue you think might be a bug, start a new thread. If it turns out it is a bug, then you can post to this thread.

by **Kraut2003** » Thu Feb 03, 2011 5:55 am

Hi Dexter & Team

at the moment it doesnt seem to be possible to sort the groups list
may be not hooked up yet but for me personaly very important

in V 5.59 you could drag and drop the groups on a position in the list that you wanted
them to be - please make this possible again

2nd bug: if you choose from from groups list show posts special from one group
and then enter a day range you get the error box FROM DATE must be less than TO DATE - in the Versions
before it was the other way round - you had to put in for example 30 DAYS to 0 DAYS old
now even if I follow the error message I dont get any result in the posts list

the same happens if you use the calendar option

Greets

Thomas

by **dexter** » Thu Feb 03, 2011 10:10 am

1) Yeah, not hooked up
2) Yeah, something's not right

I've logged them on the buglist

by **Streetwolf** » Thu Feb 03, 2011 10:52 pm

Is 'Toggle Grid' supposed to persist? If so it isn't working this way.

by **dexter** » Thu Feb 03, 2011 11:08 pm

Should. I'll add it to the list

by **Genotipe** » Fri Feb 04, 2011 1:06 am

Definitely would love to get back the ability to adjust the group list as well as the individual groups within.

Also, I'm getting an error when I try to double-click to open an NZB file:

"Warning - Another Newsbin with the same Configuration is already Running - Exiting to Preserve data files".

If I click "File", "Load NZB's", and select the NZB file, it will open as a tab in Newsbin. I will then need to select the file and add it to the download list. Is this normal?

by **richy99** » Fri Feb 04, 2011 8:54 am

sounds like you havent got the nzb extentions to open in the new version of newsbin and it is using the older v5

by **itimpi** » Fri Feb 04, 2011 9:21 am

richy99 wrote:sounds like you havent got the nzb extentions to open in the new version of newsbin and it is using the older v5

It could be an installer errors where it is not updating the file association on an upgrade from v5 to match the new binary name? I am not near Newsbin at the moment to check this out.

by **dexter** » Fri Feb 04, 2011 10:13 am

I'm not able to recreate this. Anyone else seeing this?

by **commentator** » Fri Feb 04, 2011 1:24 pm

opening nzb file directly (without saving to disc) from a site like binsearch results in empty tab (no files on it)
only saving it to disc and then open it works

by **richy99** » Fri Feb 04, 2011 1:43 pm

whgat browser you using? sounds like thats the cause not newsbin

by **commentator** » Fri Feb 04, 2011 2:44 pm

richy99 wrote:whgat browser you using? sounds like thats the cause not newsbin

ie8

was working on previous newsbin so no browser issue.

btw better performance with this beta

by **Genotipe** » Sat Feb 05, 2011 1:28 am

Genotipe wrote:
Also, I'm getting an error when I try to double-click to open an NZB file:

"Warning - Another Newsbin with the same Configuration is already Running - Exiting to Preserve data files".

Looks like a reboot fixed this. Files are now populating within the downloads area. This whole interface does take some getting used to. Slicker looking though. Keep up the good work gents. Quality product.

by **Quade** » Sat Feb 05, 2011 2:31 am

That specific error happens when you have two different versions of Newsbin installed and the wrong one gets started when an NZB gets double-clicked.

by **Genotipe** » Sat Feb 05, 2011 1:42 pm

I'm having issues where I've added multiple NZB's to the download list, and they start downloading ok, but now they are hanging there, partially downloaded. Status bar on the rar file is purple. Most of the parts within are 90%+ downloaded, but it will not complete it.

by **Quade** » Sat Feb 05, 2011 2:04 pm

Not enough information. Open some of them up (click on the arrow) and see what files didn't download and if any of the chunks are red or black.

Version 6 beta doesn't assemble incompletes nor does it do retry's. You have to do that by hand until it gets hooked up. If you have some red or black blocks, you might have to right click and "Assemble incompletes" to make it download PAR files.

by **Genotipe** » Sat Feb 05, 2011 2:36 pm

Sorry. Not exactly sure how to articulate. What does purple signify?

by **Quade** » Sat Feb 05, 2011 3:04 pm

Did you do what I suggested? Open the sets up so you can see each file?

by **Genotipe** » Sat Feb 05, 2011 3:10 pm

I did. All of the rar archive parts showed red across the board, no black boxes. The par files had the first two archive parts grayed out, and the rest were blank. Once I manually selected to assemble the incomplete first two par files, the remaining par files started to download. None would be complete fully though. I was able to assemble incomplete files for the entire rar/par set, but there are not enough par files to repair the archive. This is the same for three sets. Other sets have been successful. I am testing another one as I type this.

by **dexter** » Sat Feb 05, 2011 3:20 pm

Red means server errors. Click the logging tab to see what they are. If you are getting error #430 then the post is not on the server.

by **Genotipe** » Sat Feb 05, 2011 3:23 pm

I don't see any errors or error code #430 within the logging tab

by **dexter** » Sat Feb 05, 2011 3:51 pm

If there is red in the progress bar, there should be errors. You may have to scroll through a bunch of informational messages though. You could clear the logging tab then retry the ones that are showing up as red to isolate the messages.

NOTE: This really needs to be in its own thread. This thread was not intended for troubleshooting.

by **Genotipe** » Sat Feb 05, 2011 3:58 pm

No problem. If this continues to happen, I'll move it to it's own thread. Thank you for your help.

by **Maxdout38** » Sat Feb 05, 2011 5:23 pm

Not a bug, but you were considering adding under Filename Options:

Artist - Album (adding a space between the hyphen.)

Thanks

Maxdout38

by **Streetwolf** » Sat Feb 05, 2011 8:31 pm

If already mentioned I'll flog myself.

When auto hide is enabled hovering over an icon changes it to a description which makes it difficult if you want to rapidly go through the different views because your pointer is now somewhere else. Since the description appears in the window itself IMO the icon should remain as is so you can essentially go through all the views just by moving the pointer left or right. Perhaps you could change the appearance of the icon to indicate it is the active one.

Hope I stated this clearly.

by **richy99** » Sun Feb 06, 2011 8:32 am

Streetwolf wrote:If already mentioned I'll flog myself.

When auto hide is enabled hovering over an icon changes it to a description which makes it difficult if you want to rapidly go through the different views because your pointer is now somewhere else. Since the description appears in the window itself IMO the icon should remain as is so you can essentially go through all the views just by moving the pointer left or right. Perhaps you could change the appearance of the icon to indicate it is the active one.

Hope I stated this clearly.

yes i know what you mean, i just ripped the tabs off and put them back manually on autohide, now i can see the description of the tab without the need for hovering

by **Quade** » Sun Feb 06, 2011 11:14 am

I figured out what you're talking about but, I'm not sure I have any control over it.

The actual tab is getting wider to show the whole text

by **Streetwolf** » Sun Feb 06, 2011 1:07 pm

richy99 wrote:
Streetwolf wrote:If already mentioned I'll flog myself.

When auto hide is enabled hovering over an icon changes it to a description which makes it difficult if you want to rapidly go through the different views because your pointer is now somewhere else. Since the description appears in the window itself IMO the icon should remain as is so you can essentially go through all the views just by moving the pointer left or right. Perhaps you could change the appearance of the icon to indicate it is the active one.

Hope I stated this clearly.

yes i know what you mean, i just ripped the tabs off and put them back manually on autohide, now i can see the description of the tab without the need for hovering

Took me awhile to figure out how to do this but it works just like I want it to work. It seems a little convoluted moving tabs around. I would think just moving individual tabs where you want them is the way to go. I had to un-autohide them, float them, use the direction thingy, then autohide them. To get thim into the order I want I had to to this starting with the tab I want last, then the penultimate one and so on. Just moving the tabs in the line where they are would be alot easier.

by **dexter** » Sun Feb 06, 2011 4:11 pm

You can move the tabs in the line where you want them to be. I made a video of it but haven't posted it yet, still need to do some editing. I think a video will be easier than trying to explain with words.

by **davidn** » Wed Feb 09, 2011 5:30 pm

Hide old doesn't work for me.

by **dexter** » Thu Feb 10, 2011 4:34 pm

davidn wrote:Hide old doesn't work for me.

There isn't much information here to go on. We've identified some issues with Hide old so wait until the next beta and try again to see if we addressed your specific issue. If it isn't fixed in the next beta, start a new thread and describe exactly what you are doing and seeing. The purpose of this thread is to identify confirmed bugs. By confirmed, I mean it has at least one other person reporting the same issue. Best way to do this is with a separate thread.

by **Dreamland** » Tue Feb 22, 2011 2:15 pm

I see a behaviour where the background color of e.g. downloaded posts is not showing when you reload posts (open group with downloaded posts).
Is this meant by design?

by **FriedLocust** » Wed Mar 09, 2011 10:22 am

B5 849 opens all groups into new tabs - although I have under switches open all groups into new tabs unchecked. Minor glitch.

by **richy99** » Wed Mar 09, 2011 10:50 am

this is for confirmed bugs rather than bug reporting

i just tried it on 4 groups and couldnt replacate it, they all loaded into a single tab

by **FriedLocust** » Wed Mar 09, 2011 11:32 am

Sorry, I forgot to open a new thread for it. Delete it. :oops:

by **klawdek** » Mon May 09, 2011 4:49 pm

davidn wrote:Hide old doesn't work for me.

This bug is confirmed. It has existed for a while with a number of betas. I think my first report of it was with beta 11 but I am pretty sure it was there before.

There have been other reports in the forums of this problem:

viewtopic.php?f=44&t=28131&p=172629&hilit=hide+old#p172629

viewtopic.php?f=44&t=28210&p=173000&hilit=hide+old#p173000

viewtopic.php?f=44&t=28245&p=173088&hilit=hide+old#p173088

As well as my two previous reports

viewtopic.php?f=44&t=28255

viewtopic.php?f=44&t=28242

and in the following post Quade acknowledges the problem

viewtopic.php?f=43&t=28127&p=172452&hilit=hide+old#p172452

I think it is time to make this one an official bug. And it is an important fix as filtering out downloaded posts is a pretty basic and necessary function.

by **Quade** » Mon May 09, 2011 6:12 pm

I'm not having any mark old problems. Until I have some consistent way to reproduce the issue, I'm not going to work on it.

by **shoek** » Fri May 20, 2011 11:42 am

Love the new v6 UI... one pet peeve, however, is that there are colons: after: every: thing:
All of the column headers and tabs have a colon after them. This is not standard Windows (refer to Explorer).
Minor and cosmetic I know, but now that in v6 the UI is more of a "feature" a little polish in this area couldn't hurt.

Cheers,
shoek

by **UnknownOne** » Sat Jul 16, 2011 11:16 pm

Autoload NZB Path

I have my newsbin setup with multi-nzb load folders so I can autoload a nbz to a specfic folders like anime.nzb to anime folder but this new 6.01 beta 1,all files in the nzb are loaded into the default download folder regardless which folder I place the nzb. this problem only stared in 6.01 beta 1.

by **Quade** » Sat Jul 16, 2011 11:22 pm

I'll check it out. Thanks.

Edit: Fixed.

by **EvilMink** » Tue Aug 09, 2011 7:23 pm

Date field displays foreign/random (seen chinese/korean/arabic chars, but also name imtf.dll like if some buffer was displayed instead of date part. Hour is displayed seemingly normal.) Displayed string seems to be constant for entire group/gog regardless of date. For the "Download list" date field it changes, anyway it seems to be enough to click on the line within download list window to see the field changed. Reverted to B3.

GUI reset done by the installer. XP, SP3, display/write support/fonts for middle-eastern/asian languages installed.
Sample view after fresh B4 install - http://img30.imageshack.us/img30/8701/d ... 143729.png

edit: oops, this should go to B4 thread... sorry, late night etc ;]

by **Quade** » Tue Aug 09, 2011 10:27 pm

What happens if you "Ctrl-T" to change the time format? Is it still messed up?

by **EvilMink** » Wed Aug 10, 2011 4:11 am

Upon Ctrl-T it changes to days:hours:minutes format without problem, next Ctrl-T causes it go back to messed thing. Any date field displays mess in place of year-month-day part (groups list within the 'last updated' field as well).

by **Quade** » Wed Aug 10, 2011 8:03 am

Yeah. Problem XP only. I'd use age then for now instead of date. I'll get Dex one to test.

by **rbaer** » Wed Sep 07, 2011 8:07 am

Version 6.0 through v6.1rc3b1298:

On the Wish List tab, the Download to Folder option does not seem to be hooked up. Instead I need to Assign New Path then Add to Download List. Not a major problem, but I use it every day.

by **DThor** » Wed Sep 07, 2011 8:16 am

It's no biggie, but since v6 has been released, you can probably just make a post in the requested features thread in future. No need to repeat this one, though.

DT

by **rbaer** » Wed Sep 07, 2011 8:28 am

Installing version v6.1rc3b1298 switches the tab positions and toggles the grid.

by **Quade** » Wed Sep 07, 2011 8:29 am

On the Wish List tab, the Download to Folder option does not seem to be hooked up. Instead I need to Assign New Path then Add to Download List. Not a major problem, but I use it every day.

I'll check it out. Thanks.

by **itimpi** » Wed Sep 07, 2011 9:22 am

rbaer wrote:Installing version v6.1rc3b1298 switches the tab positions and toggles the grid.

If you mean that the tab labels are moved from top to bottom (or vice versa) there is an option to select your preferred setting under the View menu. This was introduced a few beta releases ago.

by **rbaer** » Wed Sep 07, 2011 9:36 am

itimpi wrote:
rbaer wrote:Installing version v6.1rc3b1298 switches the tab positions and toggles the grid.

If you mean that the tab labels are moved from top to bottom (or vice versa) there is an option to select your preferred setting under the View menu. This was introduced a few beta releases ago.

Yes, I've been keeping up. I used the option on the View menu to move them back. I was just surprised that the installer changed the setting on me during the upgrade. I did not choose the option to reset the interface.

Thanks.

newsbin.com

Who is online