Page 1 of 1
Posting Error
Posted:
Wed Jan 11, 2017 6:17 am
by DogSnake
Whenever I try posting/replying to a group I get these errors:
[04:13:46] ERROR Error Unknown Download Exception
[04:15:06] ERROR Server:XXXXX NNTPServer: Timeout - Waiting for Server to send Data:
[04:15:26] ERROR Error Unknown Download Exception
The reply does not go through. Any help is appreciated. I have been able to reply in the past.
Re: Posting Error
Posted:
Wed Jan 11, 2017 12:26 pm
by Quade
Yeah thanks. It's on my todo list for today.
Re: Posting Error
Posted:
Sat Jan 14, 2017 5:33 pm
by DogSnake
The replies seem to go through now. However still getting this error: [15:29:34] ERROR Error Unknown Download Exception
Also the post shows in the downloading files tab and never completes. I must use the clear files command to get rid of it. Am I missing a setting option? I checked the data folder and there is also no record of the post in the Posting folder.
Thanks
Re: Posting Error
Posted:
Sat Jan 14, 2017 5:44 pm
by kirm
Verifying what DogSnake states. It was a couple of weeks ago, not that I post much, other than thanking a poster, but had the exact same issue. Post went through even though it showed still uploading. Had to manually delete in download tab.
Re: Posting Error
Posted:
Sun Jan 22, 2017 7:28 pm
by Donald Duck
Have exact the same problem using "post.eweka.nl"
[23:24:54] ALWAYS eweka post XFEATURE COMPRESS GZIP | 290 Feature Enabled
[23:24:54] ALWAYS eweka post POST | 340 Send Article to be Posted
[23:24:54] ERROR Error Unknown Download Exception
[23:25:30] ERROR Server:eweka post NNTPServer: Timeout - Waiting for Server to send Data:
Still no solution?
Re: Posting Error
Posted:
Mon Jan 23, 2017 6:19 am
by Quade
RC2 might be up tomorrow(well today now). I didn't test eweka but did test post to Giga with no issues.
Re: Posting Error
Posted:
Mon Jan 23, 2017 9:43 am
by PCZ
When you tested the posting was it just a small text message you used ?
Reason I ask is that the later beta builds all fail to post binaries properly.
The smaller parts of the post, make it through complete but the larger parts are all broken
Rar uo something and make a test post, the larger parts will all be yellow (incomplete) if the issue remains.
If it helps 6.62 works properly.
Re: Posting Error
Posted:
Mon Jan 23, 2017 12:59 pm
by Quade
I was posting 15 meg files. I could try something larger I guess. The 340 message means the server is awaiting the post. Makes me wonder if maybe there's some timing problem. Like the server takes longer than expected to process the posts.
Keep in mind that posting is totally broken in 6.72.
Re: Posting Error
Posted:
Mon Jan 23, 2017 2:55 pm
by PCZ
It sure is.
You cant post squat with 6.72
If it's any consolation being able to filter out the spammers and not have the posts appearing in red works great in 6.72.
If that worked in 6.62 I would most likely not bother to ever upgrade.
Re: Posting Error
Posted:
Mon Jan 23, 2017 5:27 pm
by Quade
We're talking about 6.73 at this point. There will be no fixes in 6.72. At this point, the only question is whether you can post in 6.73.
Re: Posting Error
Posted:
Tue Jan 24, 2017 1:24 am
by PCZ
Sorry typo I meant 6.73
Re: Posting Error
Posted:
Tue Jan 24, 2017 2:22 pm
by DogSnake
6.73RC1
Posts go through to the proper group
This is what I get for error message: (XXXXXX is the server name)
[12:15:47] ERROR Error Unknown Download Exception
[12:17:07] ERROR Server:XXXXXXXXX NNTPServer: Timeout - Waiting for Server to send Data:
[12:17:28] ERROR Error Unknown Download Exception
Re: Posting Error
Posted:
Wed Jan 25, 2017 8:23 am
by Donald Duck
Quade wrote:RC2 might be up tomorrow(well today now). I didn't test eweka but did test post to Giga with no issues.
So let it come
Re: Posting Error
Posted:
Wed Jan 25, 2017 11:26 am
by Quade
Yeah, it got held up because Dex wanted an easier way to set a header download filter. I expect I'll be able to hand him one this morning.
Re: Posting Error
Posted:
Wed Jan 25, 2017 11:53 am
by dexter
Quade wrote:Yeah, it got held up because Dex wanted an easier way to set a header download filter. I expect I'll be able to hand him one this morning.
Ha, throw me under the bus! Me and
1000's of other people are asking for this...
Re: Posting Error
Posted:
Fri Jan 27, 2017 5:56 am
by PCZ
All is good in the world of posting with 6.73 RC2
Re: Posting Error
Posted:
Fri Jan 27, 2017 7:11 am
by saintsinner
PCZ wrote:All is good in the world of posting with 6.73 RC2
I can confirm that 6.73 RC2 fixed my posting issues as well, between this and the pre-db filtering, definitely my favorite release in ages. Thanks for the hard work guys!
Re: Posting Error
Posted:
Fri Jan 27, 2017 12:00 pm
by dexter
saintsinner wrote:PCZ wrote:All is good in the world of posting with 6.73 RC2
I can confirm that 6.73 RC2 fixed my posting issues as well, between this and the pre-db filtering, definitely my favorite release in ages. Thanks for the hard work guys!
Awesome, thanks for the confirmation.
Re: Posting Error
Posted:
Fri Jan 27, 2017 4:25 pm
by DogSnake
Once again NB roks. All is well in the world of posting. I can confirm my error notices are gone.
Thanks
Re: Posting Error
Posted:
Fri Feb 10, 2017 9:15 pm
by Donald Duck
DogSnake wrote:Once again NB roks. All is well in the world of posting. I can confirm my error notices are gone.
Thanks
For me is all ok now too!
Let me say a BIG THANKS